Pneumatic Conveying Systems

Pneumatic Conveying Systems: Faster, More Reliable.

The principle of pneumatic conveying systems is based on the movement of bulk materials through pipeline networks using air. The flowing conveying air imparts a pushing force onto the bulk material, allowing it to be transported along the conveying line. Pneumatic conveying always requires a pressure differential between the beginning and the end of the pipeline. Carrier blowers or compressors are used to overcome this pressure differential.

DENSE PHASE PNEUMATIC CONVEYING

Dense Phase Pneumatic Conveying Systems are categorized as Pulse Type or Continuous Type…

DILUTE PHASE PNEUMATIC CONVEYING

MDSJ Process dilute phase pneumatic conveying systems use low air ratios and low pressures…

MULTI DENSE PHASE

Pneumatic conveying system is the transmission of products from one point to another point at separate speeds as a sparse

AIR PULSE JET

Air compressed into a tube resistant to high pressure is stored between 2-6 bar. The stored air can be normal air or nitrogen.

TWO WAY DIWERTER VALVE

Two-way Pipeline Valve ensures positive and reliable passage of material. Flow in pressure pneumatic conveying pipelines is used for…

TA 45-90 TWO WAY DIWERTER VALVE

TA 45-90 Two Way Diwerter Valve Manufactured as 45 and 90 degree alternatives TA Two-way Pipeline Valve provides positive…

ACE ANTI CORROSIVE ELBOW

It has an anti-corrosive structure and is manufactured from Abrasion-Resistant Special Alloy Casting.

PBV PRESSURE BALANCE VALVE

Injection Pressure Stabilizer (PBV pressure balance valve) – for dry, coarse or granular powders…

SSV SILO SAFETY VALVES

It is a Safety equipment used to safely discharge the Positive air pressure of the Raw Materials delivered to the Storage Silos..

Advantages and Benefits of Pneumatic Conveying Systems

Pneumatic Tube Systems, which are used to rapidly and safely transport materials from one place to another within a closed circuit tube, can be designed and implemented in different sizes according to the requirements.

Pneumatic Tube Systems, which operate with pressurized suction or blowing airflow, consist of a pump, feeding mechanism, and main pipe sections.

These systems, which enable the rapid transportation of samples or materials within a facility, not only save time but also contribute to increased productivity.

It allows materials to be transferred quickly without being deformed
It prevents human-induced shipping problems
It saves labor and time.
As the transported products do not come into contact with the external environment, it creates a hygienic and safe. transportation opportunity
It prevents harmful dust and particles that may spread from the product to the atmosphere during transportation
It allows transfer to all pipelines where the system is installed
Provides maximum efficiency in the transportation of materials
It provides the opportunity to ship materials with control and with zero loss