MDSJ tray scrubber is a versatile and low-pressure washer with highly efficient dust capturing capabilities, suitable for a wide range of applications. It is also suitable for the absorption of gases and vapors such as SO2, HF, HCl, NH3, and Cl2, as well as for the removal of SO2.
The scrubber can be equipped with a perforated turbulent contact tray or a controlled tray. The perforated tray type consists of numerous holes, while the controlled tray is similar to a regular tray scrubber but has special deflectors placed over each hole. These deflectors enhance the dust collection efficiency by allowing the dust to directly impact the target submerged in water, which is then washed away by the flowing liquid.
Depending on the application requirements, several stage tray types and one or more stages can be incorporated into the MDSJ tray scrubber. Recirculated liquids containing up to 2% solids can be used in the washer.
During operation, the dirty gas enters the bottom of the cleaner and passes through the holes in the tray. The washing liquid moves to the upper contact stage and flows along the tray. The gas undergoes dust capture and forms a special gas/liquid mixture. The cleaned gas then passes through a mist eliminator and exits the unit from the top to the atmosphere.
MDSJ turbulent contact tray scrubbers can be made of carbon steel, stainless steel, special alloys, and plastics. Units with capacities ranging from 1000 to 400,000 m3 are available.
MDSJ tray scrubber is a versatile and low-pressure washer that is highly efficient in capturing dust particles, making it suitable for a wide range of applications.
The MDSJ tray scrubber is also suitable for the absorption of gases and vapors such as SO2, HF, HCl, NH3, and Cl2, as well as for the removal of SO2.
The scrubber can be equipped with a perforated turbulent contact tray or a controlled tray.
The perforated tray type consists of numerous holes, while the controlled tray is similar to a regular tray scrubber but has special deflectors placed over each hole. These deflectors enhance the dust collection efficiency by allowing the dust to directly impact the target submerged in water, which is then washed away by the flowing liquid.
Depending on the application requirements, the MDSJ tray scrubber can be designed with multiple stage tray types and one or more stages. Recycled liquids containing up to 2% solids can be used in the washer.
During operation, the dirty gas enters the base of the scrubber and passes through the holes in the tray. The washing liquid moves to the upper contact stage and flows along the tray.
The gas undergoes dust capture and forms a special gas/liquid mixture.
The cleaned gas then passes through a mist eliminator and is released into the atmosphere from the top of the unit.
MDSJ turbulent contact tray scrubbers can be made of carbon steel, stainless steel, special alloys, and plastics. Units with capacities ranging from 1000 to 400,000 m3 are available.
As the gas enters the tower, it moves upward and interacts with the liquid on the surface of the tray through a perforated tray. The presence of specific-sized and distributed holes in the tray promotes vigorous bubbling of the gas within the liquid, increasing the gas-liquid contact time and surface area. The number of trays, liquid flow rate, and chemical requirements are determined based on the type of pollutant, the degree of cleaning efficiency desired, and the capability to remove impurities.
Before being released into the atmosphere, the cleaned gas passes through a mist eliminator on top of the tower, where the remaining mists are captured.
MDSJ AIR ENGINEERING table applications MDSJ table wet scrubber scrubber can generally be used in any gas suction suction lines, especially at points containing particles. In addition, MDSJ AIR Tray Wet Scrubbers are specifically designed to remove particulate matter of 3 microns and larger and fumes and gases that may be present with a gaseous pollutant.
MDSJ AIR ENGINEERING table wet scrubber scrubbers have High Efficiency, Low Cost.
High efficiency: By properly sizing the unit, selecting the number of trays, and adjusting the water-to-gas ratio, efficiencies of 97% or higher can be achieved. MDSJ tray scrubbers typically consist of 2 or 5 trays, but each application in MDSJ tray scrubbers may require specific design considerations to meet its unique requirements.
Low operating cost: The MDSJ AIR design minimizes water consumption and can eliminate the need for chemical additives by incorporating low-velocity, low-pressure gas passages. Additionally, the absence of a recirculation system often reduces power consumption.
MDSJ AIR ENGINEERING Wet Scrubbers are designed for a wide range of applications. Different gases can be easily treated within a single unit, eliminating the need for multiple stages and allowing for flexibility and customization.
To select an MDSJ wet scrubber for a specific application, it is important to have a good understanding of the operating factors such as the volume of the gas to be treated, the type of pollutants present, and the desired efficiency.
At this point, MDSJ authorized engineers can assist in the selection of the wet scrubber by considering not only the system size but also the auxiliary equipment such as pumps, fans, and chemical feeding systems required to create a complete system.
These experts can help in choosing the right equipment based on the specific application requirements, ensuring an effective solution is implemented.
The customer holds great importance for the MDSJ process. We always respect the customer and carefully track their needs.
Copyright 2023 © MSDJ Process | All Rights Reserved.
